Pressure washing estimates measured from above and closed at the door
Trace the driveway, patio and fence on the satellite map, price every surface by the square or linear foot with your own minimums, and book the wash before you leave the curb.
From $30/mo, or $25/mo billed yearly · 14-day free trial · no contract
The estimate is where a washing business makes or loses its margin. Guess the driveway at 600 square feet when it is 900 and you have washed 300 feet for free. Price a tiny patch per foot with no floor and you lose money unloading the rig. FieldStacker's quote builder is set up for both problems: measure first, and never price a line below its minimum.
Running the whole business? The pressure washing CRM page covers the crew schedule, job checklist, recurring plans and payments.
Price each surface the way you measure it
Your price list starts with a pressure washing setup. Change any rate, unit or minimum, or add your own services.
| Starter service | Priced |
|---|---|
| House wash (soft wash) | Flat package |
| Driveway & walkways | Per sq ft package, with a minimum |
| Full exterior package | Flat package |
| Roof soft wash | Flat |
| Deck / patio | Per sq ft, with a minimum |
| Fence | Per linear ft, with a minimum |
| Gutter brightening | Per linear ft, with a minimum |
| Rust / stain removal | Flat add-on |
Packages, services and add-ons
The customer picks one package, then adds services and flat add-ons. The quote shows the subtotal, any discount, taxes and the total as you go.
A minimum on every line
Each line costs the larger of quantity times rate or its minimum, so a small job always covers the trip.
How long it will take
Set the minutes each service takes and the quote estimates the job length, so you book the right size of slot.
Measure the driveway without the wheel
On the quote you build at the door, open "📐 Measurements" and pick the address. Trace the surfaces on the satellite map and FieldStacker works out the square footage and the lengths.
- Trace areas: driveway, patio, walkway, deck and pavers
- Draw lines: fence and gutters
- A house lookup gives the roof area and an estimate of the siding
- Any service priced per square foot or per linear foot gets a box for the number, with a 📐 chip offering the measurement that fits it
- You tap the chip to use it, so you see every number before it prices the job
- The measurements are saved with the quote
Measurements from the map are estimates. Satellite measuring is on the quote you build, not on the website quote builder.
Price your next driveway from the satellite
Pick pressure washing at signup and your price list is ready to quote from.
- No credit card to start
- From $30/mo after the trial
- Your techs and cleaners are free
- Cancel any time from the app
From the estimate to a booked wash
The neighbour asked what their driveway would cost. Here is how the quote turns into a job before you pack up.
- Pick how often. One-time, or a plan from weekly to once a year. The recurring discount you set for that cadence comes off by itself.
- Book it. Tap Book and FieldStacker offers three times from your crew's real availability, marks the quote accepted and emails the customer their time.
- Or let them decide. Send the quote only, email it, or show a QR code so they open it on their phone, approve it and pick a time.
- Signed if you want it. Require a signature and the customer signs on the screen before it books. Nothing is charged by signing.
- Card on file. The customer can save a card, which is charged when you complete the visit.
Estimates you can trust and follow up
Priced again on the server
The builder sends only the services and quantities. The price is worked out again from your price list, so an old copy on a phone can't undercut you.
You decide who can discount
Reps type a percentage off or change a line's price only if you turn that on. Otherwise your cadence discounts apply and nothing else.
A price that holds, then expires
A sent quote holds its price for 48 hours by default. Change the time to suit how you sell.
Follow-up on day 3
Turn on the quote reminder email and it goes out on day 3, skipping quotes that were approved or declined. Waiting quotes also show on your home screen.
Quotes on your website
Paste the quote builder into your own website. Homeowners pick a package, services and how often, see the price and open their quote to approve and book. Promo codes work.
Quote from the knock map
Working a street? The knock map shows which doors you've tried and who asked you to come back, so the next estimate is next door.
Pressure washing estimating questions
How do I estimate a pressure washing job?
Most jobs are priced by area or length: concrete, decks and patios per square foot, fences and gutters per linear foot, and a house or roof wash flat or by area. In FieldStacker each service has its own unit, rate and minimum charge, so you measure, type the number in and the quote adds itself up. The minimum stops a small patch being priced below the cost of showing up.
Can I measure a driveway from the satellite?
Yes, on the quote you build at the door. Pick the address, then trace the driveway, patio, walkway, deck or pavers on the satellite map, and draw fences and gutters as lines. A service priced per square foot or per linear foot then offers the measured number with a 📐 chip, and you tap it to use it. Measured lengths and areas are estimates, so you always see the number before it goes on the quote.
Does it measure the house for a soft wash?
A house lookup gives the roof area and an estimate of the siding area. If you price house or roof washing per square foot, those numbers are offered to those lines. The starter price list prices the house wash and roof soft wash flat, so switch them to per square foot if you want to use the measurement.
Can homeowners get a quote on my website?
Yes. Turn on the website quote builder and paste its snippet into your site. A homeowner picks a package and services, chooses a one-time wash or a recurring plan, sees the price and opens their quote to approve it and book. Our server checks every price again, and promo codes work. Satellite measuring is only on the quote you build, not on the website.
Can I close the job at the door?
Yes. Tap Book and FieldStacker marks the quote accepted, offers times from your crew's real availability, books the visit and emails the customer their time. Or send the quote only, email it, or let the customer scan a QR code and approve it on their own phone. If you require a signature, the customer signs on the screen before it books. A card can be saved and is charged when the job is done.
What happens to quotes nobody answers?
A sent quote holds its price for 48 hours by default, and you can change that. Quotes still waiting show on your home screen to follow up, and you can turn on a reminder email that goes out on day 3 and skips quotes already approved or declined.
How is this different from the pressure washing CRM page?
This page is about the estimate: measuring, pricing and closing the quote. The pressure washing CRM page covers the rest of the business: the crew schedule, the 27-step job checklist, recurring plans and getting paid.
How much does it cost?
Quoting is on Pro at $30/mo, or $25/mo billed yearly, and on Team at $60/mo for 3 people. Every plan starts with a 14-day free trial with no credit card. The Website & Hosting plan does not include quoting.
Related: pressure washing CRM · estimating software · door-to-door quoting app · window cleaning · pricing
Measure it, price it, book it
14-day free trial, no credit card. Your pressure washing price list is ready when you log in.